Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Overload effect revisited - Investigation by use of configurational forces (Artikel)
    Ochensberger, W. and Kolednik, O.
    International Journal of Fatigue (2016)
    Externer Link:Link
  • X-ray nanodiffraction analysis of stress oscillations in W thin film of through-silicon via (Artikel)
    Todt, J. and Hammer, H. and Sartory, B. and Burghammer, M. and Kraft, J. and Daniel, R. and Keckes, J. and Defregger, S.
    Journal of Applied Crystallography (2016)
    Externer Link:Link
  • The mechanics of tessellations – Bioinspired strategies for fracture resistance (Artikel)
    Fratzl, P. and Kolednik, O. and Fischer, F.D. and Dean, M.N.
    Chemical Society Reviews (2016)
    Externer Link:Link
  • About the fatigue crack propagation threshold of metals as a design criterion – A review (Artikel)
    Zerbst, U. and Vormwald, M. and Pippan, R. and Gänser, H.P. and Sarrazin-Baudoux, C. and Madia, M.
    Engineering Fracture Mechanics (2016)
    Externer Link:Link
  • Microscopic texture characterisation in piezoceramics (Artikel)
    Deluca, M.
    Advances in Applied Ceramics (2016)
    Externer Link:Link
  • Application of 2D finite element analysis to compare cracking behavior in twin disc tests and full-scale wheel-rail experiments (Artikel)
    Kracalik, M. and Trummer, G. and Daves, W.
    Wear (2016)
    Externer Link:Link
  • Calculation of crack driving forces of surface cracks subjected to rolling/sliding contact (Artikel)
    Kracalik, M. and Daves, W. and Antretter, T.
    Engineering Fracture Mechanics (2016)
    Externer Link:Link
  • Influence of subcritical crack growth on the determination of fracture toughness in brittle materials (Artikel)
    Krautgasser, C. and Chlup, Z. and Supancic, P. and Danzer, R.
    Journal of the European Ceramic Society (2016)
    Externer Link:Link
  • First-principles modeling of energetic and mechanical properties of Ni-Cr, Ni-Re and Cr-Re random alloys (Artikel)
    Breidi, A. and Fries, S.G. and Palumbo, M. and Ruban, A.V.
    Computational Materials Science (2016)
    Externer Link:Link
  • High temperature mechanical properties of WC-Co hard metals (Artikel)
    Teppernegg, T. and Klünsner, T. and Kremsner, C. and Tritremmel, C. and Puchegger, S. and Czettl, C. and Pippan, R. and Ebner, R.
    International Journal of Refractory Metals and Hard Materials (2016)
    Externer Link:Link
  • Advanced characterization methods for wear resistant hard coatings: A review on recent progress (Artikel)
    Tkadletz, M. and Schalk, N. and Daniel, R. and Keckes, J. and Czettl, C. and Mitterer, C.
    Surface and Coatings Technology (2016)
    Externer Link:Link
  • Nonlinear lock-in infrared microscopy: A complementary investigation technique for the analysis of functional electroceramic components (Artikel)
    Hofstätter, M. and Raidl, N. and Sartory, B. and Supancic, P.
    Microscopy and Microanalysis (2016)
    Externer Link:Link
  • Effect of thermal lattice expansion on the stacking fault energies of fcc Fe and Fe75Mn25 alloy (Artikel)
    Razumovskiy, V. and Reyes-Huamantinco, A. and Puschnig, P. and Ruban, A.
    Physical Review B (2016)
    Externer Link:Link
  • Influence of surface topography on early stages on steel galling of coated WC-Co hard metals (Artikel)
    Klünsner, T. and Zielbauer, F. and Marsoner, S. and Deller, M. and Morstein, M. and Mitterer, C.
    International Journal of Refractory Metals and Hard Materials (2016)
    Externer Link:Link
  • TiN diffusion barrier failure by the formation of Cu3Si investigated by electron microscopy and atom probe tomography (Artikel)
    Mühlbacher, M. and Greczynski, G. and Sartory, B. and Mendez Martin, F. and Schalk, N. and Lu, H. and Hultman, L. and Mitterer, C.
    Journal of Vacuum Science and Technology B (2016)
    Externer Link:Link
  • The effect of single overloads in tension and compression on the fatigue crack propagation behaviour of short cracks (Artikel)
    Zhou, X. and Gänser, H.P. and Pippan, R.
    International Journal of Fatigue (2016)
    Externer Link:Link
  • Preface: International conference on materials processing and product engineering (MPPE 2015) (Artikel)
    Eck, S. and Ludwig, A. and Ebner, R .
    Materials Science and Engineering (2016)
    Externer Link:Link
  • Laser-assisted metal spinning for an efficient and flexible processing of challenging materials (Artikel)
    Brummer, C. and Eck, S. and Marsoner, S. and Arntz, K. and Klocke, F.
    Materials Science and Engineering (2016)
    Externer Link:Link
  • Automatic optimization of localized heat treatment for Al-Si-Mg alloys (Artikel)
    Holzmann, T. and Ludwig, A.
    Materials Science and Engineering (2016)
    Externer Link:Link
  • Induction hardening: Differences to a conventional heat treatment process and optimization of its parameters (Artikel)
    Vieweg, A. and Ressel, G. and Prevedel, P. and Raninger, P. and Panzenböck, M. and Marsoner, S. and Ebner, R.
    Materials Science and Engineering (2016)
    Externer Link:Link
34 35 36 37 38 39 40 41 42 43 44