Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses (Artikel)
    Krautgasser, C. and Bermejo, R. and Supancic, P. and Danzer, R.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
  • Crack driving force in twisted plywood structures (Artikel)
    Fischer, F.D. and Kolednik, O. and Predan, J. and Razi, H. and Fratzl, P.
    Acta Biomaterialia (2017)
    Externer Link:Link
  • Validation methodology to analyze the temperature-dependent heat path of a 4-chip LED module using a finite volume simulation (Artikel)
    Mitterhuber, L. and Defregger, S. and Hammer, R. and Magnien, J. and Schrank, F. and Hörth, S. and Hutter, M. and Kraker, E.
    Microelectronics Reliability (2017)
    Externer Link:Link
  • Computer-Tomography and ist Use in Failure Analysis (Artikel)
    Panzenböck, M. and Borchert, M. Freitag, D.
    Praktische Metallographie (2017)
  • An Energy Approach to Determine the Martensite Morphology in Nanocrystalline NiTi (Artikel)
    Petersmann, M. and Pranger, W. and Waitz, T. and Antretter, T.
    Advanced Engineering Materials (2017)
    Externer Link:Link
  • Probing electron beam effects with chemoresistive nanosensors during in situ environmental transmission electron microscopy (Artikel)
    Steinhauer, S. and Wang, Z. and Zhou, Z. and Krainer, J. and Köck, A. and Nordlund, K. and Djurabekova, F. and Grammatikopoulos, P. and Sowwan, M.
    Applied Physics Letters (2017)
    Externer Link:Link
  • Effects of the Inductive Hardening Process on the Martensitic Structure of a 50CrMo4 Steel (Artikel)
    Vieweg, A. and Ressel, G. and Prevedel, P. and Marsoner, S. and Ebner, R.
    HTM Journal of Heat Treatment and Materials (2017)
    Externer Link:Link
  • High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer (Artikel)
    Hammer, R. and Todt, J. and Keckes, J. and Sartory, B. and Parteder, G. and Kraft, J. and Defregger, S.
    Materials and Design (2017)
    Externer Link:Link
  • Peculiarity of self-assembled cubic nanolamellae in the TiN/AlN system: Epitaxial self-stabilization by element deficiency/excess (Artikel)
    Zalesak, J. and Holec, D. and Matko, I. and Petrenec, M. and Sartory, B. and Koutna, N. and Daniel, R. and Pitonak, R. and Keckes, J.
    Acta Materialia (2017)
    Externer Link:Link
  • Differentiation of grain orientation with corrosive and colour etching on a granular bainitic steel (Artikel)
    Reisinger, S. and Ressel, G. and Eck, S. and Marsoner, S.
    Micron (2017)
    Externer Link:Link
  • Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics (Artikel)
    Gruber, M. and Supancic, P. and Aldrian, F. and Bermejo, R.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
  • Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading (Artikel)
    Gruber, M. and Kraleva, I. and Supancic, P. and Bielen, J. and Kiener, D. and Bermejo, R.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
  • Insights towards Condition Monitoring of Fixed Railway Crossings (Artikel)
    Oßberger, U. and Kollment, W. and Eck, S.
    Procedia Structural Integrity (2017)
    Externer Link:Link
  • Experimentelle und numerische Untersuchung des induktiven Anlassens eines Vergütungsstahles (Artikel)
    A. Vieweg, P. Raninger, P. Prevedel, G. Ressel, W. Ecker, S. Marsoner, R. Ebner
    Journal of Heat Treatment and Materials (2017)
    Externer Link:Link
  • Numerical and Experimental Investigation of the Influence of Growth Restriction on Grain Size in Binary Cu Alloys (Artikel)
    Cziegler, A. and Geraseva, O. and Schumacher, P.
    Metals (2017)
    Externer Link:Link
  • Influence of Ar ion etching on the surface topography of cemented carbide cutting inserts (Artikel)
    Gassner, M. and Schalk, N. and Sartory, B. and Pohler, M. and Czettl, C. and Mitterer, C.
    International Journal of Refractory Metals & Hard Materials (2017)
    Externer Link:Link
  • Resolving alternating stress gradients and dislocation densities across AlxGa1-xN multilayer structures on Si(111) (Artikel)
    Reisinger, M. and Tomberger, M. and zechner, J. and Daumiller, I. and Sartory, B. and Ecker, W. and Keckes, J. and Lechner R. T.
    Applied Physics Letters (2017)
    Externer Link:Link
  • The contribution of 180° domain wall motion to dielectric properties quantified from in situ X-ray diffraction (Artikel)
    Fancher, C.M. and Brewer, S. and Chung, C.C. and Röhrig, S. and Rojac, T. and Esteves, G. and Deluca, M. and Bassiti-Gharb, N. and Jones, J.L.
    Acta Materialia (2017)
    Externer Link:Link
  • Influence of ferroelectric domain texture on the performance of multilayer piezoelectric actuators (Artikel)
    Kaufmann, A. and Röhrig, S. and Supancic, P. and Deluca, M.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
  • Electrical fatigue behavior of lead zirconate titanate ceramic under elevated temperatures (Artikel)
    Promsawat, M. and Deluca, M. and Kampoosiri, S. and Marungsri, B. and Pojprapai, S.
    Journal of the European Ceramic Society (2017)
    Externer Link:Link
29 30 31 32 33 34 35 36 37 38 39