Publikationen
- Influence of Silicon and Manganese on the Peritectic Range for Steel Alloys (Artikel)
Presoly, P. and Bernhard, C.
Iron & steel technology (2017)
Externer Link:Link - Laser Ultrasonic Thin Film Characterization of Si-Cu-Al-Cu Multi-Layered Stacks (Artikel)
Grünwald, E. and Nuster, R. and Paltauf, G. and Maier, T. and Wimmer-Teubenbacher, R. and Konetschnik, R. and Kiener, D. and Leitgeb, V. and Köck, A. and Brunner, R.
Materials Today: Proceedings (2017)
Externer Link:Link - Application of root area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components (Artikel)
Garb, C. and Leitner, M. and Grün, F.
Engineering Fracture Mechanics (2017)
Externer Link:Link - Microporosity and statistical size effect on the fatigue strength of cast aluminium alloys EN AC-45500 and 46200 (Artikel)
Leitner, M. and Garb, C. and Remes, H. and Stoschka, M.
Materials Science & Engineering A (2017)
Externer Link:Link - Strength of WC-Co hard metals as a function of the effectively loaded volume (Artikel)
Jonke, M. and Klünsner, T. and Supancic, P. and Harrer, W. and Glätzle, J. and Barbist, R. and Ebner, R.
Int. Journal of Refractory Metals and Hard Materials (2017)
Externer Link:Link - Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine grained binary Cu-Alx solid solutions (Artikel)
V. Maier-Kiener, X. An, Z.-F. Zheng, R. Pippan, K. Durst
Journal of Materials Research (2017)
Externer Link:Link - Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume (Artikel)
V. Maier-Kiener, K. Durst
JOM (2017)
Externer Link:Link - Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation (Artikel)
V. Maier-Kiener, B. Schuh, E. George, H. Clemens, A. Hohenwarter
Journal of Materials Research (2017)
Externer Link:Link - Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation (Artikel)
B. Merle, V. Maier-Kiener, G.M. Pharr
Acta Materialia (2017)
Externer Link:Link - Dynamic nanoindentation testing: is there an influence on a material’s hardness? (Artikel)
A. Leitner, V. Maier-Kiener, D. Kiener
Materials Research Letters (2017)
Externer Link:Link - Phase decomposition of a single-phase AlTiVNb high-entropy alloy after severe plastic deformation and annealing (Artikel)
B. Schuh, B. Völker, V. Maier-Kiener, J. Todt, J. Li, A. Hohenwarter
Advanced Engineering Materials (2017)
Externer Link:Link - Extraction of Flow Behavior and Hall–Petch Parameters Using a Nanoindentation Multiple Sharp Tip Approach (Artikel)
A. Leitner, V. Maier-Kiener, D. Kiener
Advanced Engineering Materials (2017)
Externer Link:Link - Deformation mechanisms during severe plastic deformation of a Cu-Ag composite (Artikel)
K. Kormout, P. Ghosh, V. Maier-Kiener, R. Pippan
Journal of Compounds and Alloys (2017)
Externer Link:Link - Extracting flow curves from nano-sized metal layers in thin film systems (Artikel)
D. Kozic, V. Maier-Kiener, R. Konetschnik, H.-P. Gänser, T. Antretter, R. Brunner, D. Kiener
Scripta Materialia (2017)
Externer Link:Link - Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys (Artikel)
V. Maier-Kiener, B. Schuh, E. George, H. Clemens, A. Hohenwarter
Materials & Design (2017)
Externer Link:Link - Buckle induced delamination techniques to measure the adhesion of metal dielectric interfaces (Artikel)
A. Kleinbichler, J. Zechner, M. Cordill
Microelectronic Engineering (2017)
Externer Link:Link - Finite element modeling of the residual stress evolution in forged and direct-aged Alloy 718 turbine disks during manufacturing and its experimental validation (Artikel)
A. Drexler, W. Ecker, R. Hessert, B. Oberwinkler, H.-P. Gänser, J. Keckes, M. Hofmann, A. Fischersworring-Bunk
AIP Conf. Proc. (2017)
Externer Link:Link - Experimental and computational approach to evaluate the effect of leveling on the change of tensile properites of heavy steel plates (Artikel)
T. Kaltenbrunner, W. Ecker, T. Antretter, R. Kaiser, E. Parteder, R. Egger
AIP Conf. Proc. (2017)
Externer Link:Link - Finite element shot peening simulation of coated cutting inserts (Artikel)
L. Faksa, W. Daves, W. Ecker, C. Czettl
Shot peening - modeling - PROCEEDINGS (2017)
Externer Link:Link - Microstructural Effects on the Toughness of a High Co–Ni Steel (Artikel)
Gruber M., Ressel G., Ploberger S., Marsoner S., Kolednik O., Ebner R.
Advanced Engineering Materials (2017)
Externer Link:Link