Publikationen
- Modeling particle distances of coherent prolate- and oblate-shaped precipitates in bcc systems (Artikel)
Sonderegger, B. and Kozeschnik, E. and Sommitsch, C.
Materials Science Forum (2012)
Externer Link:Link - Effect of high-strength filler metals on fatigue (Artikel)
Stoschka, M. and Fössl, T. and Leitner, M. and Posch, G.
Welding in the World (2012)
Externer Link:Link - 3D finite element simulation of cold pilgering over the whole productive time (Artikel)
Strickner, G. and Ragger, K. and Hatzenbichler, T. and Buchmayr, B.
Steel Research International (2012) - Surface crack in tension or in bending - A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials (Artikel)
Strobl, S. and Supancic, P. and Lube, T. and Danzer, R.
Journal of the European Ceramic Society (2012)
Externer Link:Link - Toughness measurement on ball specimens. Part I: Theoretical analysis (Artikel)
Strobl, S. and Supancic, P. and Lube, T. and Danzer, R.
Journal of the European Ceramic Society (2012)
Externer Link:Link - Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions (Artikel)
Supancic, P. and Schöpf, H.
Journal of the European Ceramic Society (2012)
Externer Link:Link - Modelling for hydrogen diffusion in metals with traps revisited (Artikel)
Svoboda, J. and Fischer, F.D.
Acta Materialia (2012)
Externer Link:Link - Modeling the role of sources and sinks for vacancies on the kinetics of diffusive phase transformation in binary systems with several stoichiometric phases (Artikel)
Svoboda, J. and Fischer, F.D. and Abart, R.
Philosophical Magazine Letters (2012)
Externer Link:Link - Derivation of the phase field equations from the thermodynamic extremal principle (Artikel)
Svoboda, J. and Fischer, F.D. and McDowell, D.L.
Acta Materialia (2012)
Externer Link:Link - Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions (Artikel)
Warczok, P. and Zenisek, J. and Kozeschnik, E.
Computational Materials Science (2012)
Externer Link:Link - Duplex processing for increased adhesion of sputter deposited Ti1-xAlxN coatings on a Fe-25%Co-15%Mo tool material (Artikel)
Weirather, T. and Fian, A. and Sartory, B. and Caliskanoglu, D. and Kölker, W. and Mitterer, C.
Surface and Coatings Technology (2012)
Externer Link:Link - Yield stress influenced by the ratio of wire diameter to grain size - A competition between the effects of specimen microstructure and dimension in micro-sized polycrystalline copper wires (Artikel)
Yang, B. and Motz, C. and Rester, M. and Dehm, G.
Philosophical Magazine (2012)
Externer Link:Link - Fracture mechanisms of structural and functional multilayer ceramic structures (Artikel)
Bermejo, R. and Sestakova, L. and Grünbichler, H. and Lube, T. and Supancic, P. and Danzer, R.
Key Engineering Materials (2011)
Externer Link:Link - Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading (Artikel)
Bermejo, R. and Supancic, P. and Kraleva, I. and Morrell, R. and Danzer, R.
Journal of the European Ceramic Society (2011)
Externer Link:Link - Computational modelling of laser treatment of plates for increased buckling loads and natural frequencies (Artikel)
Bilik, C. and Rammerstorfer, F.G. and Figala, G. and Buchmayr, B.
Journals of Mechanical Engineering Science (2011)
Externer Link:Link - Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature (Artikel)
Cha, L. and Clemens, H. and Dehm, G.
International Journal of Materials Research (2011)
Externer Link:Link - In-situ TEM heating study of the gamma lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy (Artikel)
Cha, L. and Clemens, H. and Dehm, G. and Zhang, Z.
Advanced Materials Research (2011)
Externer Link:Link - Physical metallurgy and properties of ß-solidifying TiAl based alloys (Artikel)
Clemens, H. and Schmölzer, T. and Schloffer, M. and Schwaighofer, E. and Mayer, S. and Dehm, G.
Materials Research Society Symposium Proceedings (2011)
Externer Link:Link - CO addition in low-pressure chemical vapour deposition of medium-temperature TiCxN1-x based hard coatings (Artikel)
Czettl, C. and Mitterer, C. and Mühle, U and Rafaja, D. and Puchner, S. and Hutter, H. and Penoy, M. and Michotte, C. and Kathrein, M.
Surface and Coatings Technology (2011)
Externer Link:Link - Strength and fracture analysis of silicon-based components for embedding (Artikel)
Deluca, M. and Bermejo, R. and Pletz, M. and Supancic, P. and Danzer, R.
Journal of the European Ceramic Society (2011)
Externer Link:Link