Publikationen




Gruppe:
Materials Engineering
Microelectronics
Process Engineering
Product Engineering
Steels / Non- Ferrous Metals
Structural Components
Tooling
  • Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal–Matrix Composite (Artikel)
    Węglewski, W., Pitchai, P., Bochenek, K., G. Bolzon, R. Konetschnik, B. Sartory, R. Ebner, D. Kiener und M. Basista
    Metall and Mat Trans A (2020)
    Externer Link:Link
  • Failure of high power varistor ceramic components (Artikel)
    R. Danzer, B. Kaufmann, P. Supancic
    Journal of the European Ceramic Society (2020)
    Externer Link:Link
  • Addressing H-Material Interaction in Fast Diffusion Materials—A Feasibility Study on a Complex Phase Steel (Artikel)
    A. Massone, A. Manhard, A. Drexler, C. Posch, W. Ecker, V. Maier-Kiener, D. Kiener
    Materials (2020)
    Externer Link:Link
  • Interaction of particulate TiC in a steel-based MMC: A thermodynamic approach on phase compositions (Artikel)
    J. Pörnbacher, H. Leitner, S. Marsoner, G. Ressel
    Euro PM 2018 (2020)
    Externer Link:Link
  • Investigation of Schottky barriers at Pd-ZnO junctions in varistors (Artikel)
    Benjamin Kaufmann, Nadine Raidl, Peter Supancic
    Journal of the European Ceramic Society (2020)
    Externer Link:Link
  • Microstructural based hydrogen diffusion and trapping models applied to Fe–C-X alloys (Artikel)
    Andreas Drexler, Tom Depover, Silvia Leitner, Kim Verbeken, Werner Ecker
    Journal of Alloys and Compounds (2020)
    Externer Link:Link
  • Model-Based Residual Stress Design in Multiphase Seamless Steel Tubes (Artikel)
    S. Leitner, G. Winter, J. Klarner, T Antretter and W. Ecker
    Materials (2020)
    Externer Link:Link
  • Multi-phase ELAStic Aggregates (MELASA) software tool for modeling anisotropic elastic properties of lamellar composites (Artikel)
    M. Friák, D. Lago, N. Koutná, D. Holec, T. Rebok, M. Šob,
    Computer Physics Communications (2020)
    Externer Link:Link
  • Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation (Artikel)
    W. Ecker, J. Keckes, M. Krobath, J. Zalesak., R. Daniel, M. Rosenthal, J. Todt
    Materials & Design (2020)
    Externer Link:Link
  • On solute depletion zones along grain boundaries during segregation (Artikel)
    Daniel Scheiber, Tobias Jechtl, Jiri Svoboda, Franz D. Fischer, Lorenz Romaner
    Acta Materialia (2020)
    Externer Link:Link
  • Probing defect relaxation in ultra-fine grained Ta using micromechanical spectroscopy (Artikel)
    M. Alfreider, D. Kiener, et al
    Acta Materialia (2020)
    Externer Link:Link
  • Range-relaxed criteria for choosing the Lagrange multipliers in nonstationary iterated Tikhonov method (Artikel)
    R Boiger, A Leitão, B F Svaiter
    IMA Journal of Numerical Analysis (2020)
    Externer Link:Link
  • Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents (Artikel)
    Stylianou, Velic, Daves, Ecker, Stark, Schell, Tkadletz, Schalk, Czettl, Mitterer
    International Journal of Refractory Metals and Hard Materials (2020)
    Externer Link:Link
  • Study on Ca Segregation towards an Epitaxial Interface between Bismuth Ferrite and Strontium Titanate (Artikel)
    Ulrich Haselmann, Georg Haberfehlner, Weijie Pei, Maxim Popov, Lorenz Romaner, Daniel Knez, Jian Chen, Arsham Ghasemi, Yunbin He, Gerald Kothleitner, Zaoli Zhang
    ACS Applied Materials & Interfaces (2020)
    Externer Link:Link
  • Morphology of Fe2Al5 particles and the interface to WC coating in the context of hot-dip galvanizing: An ab initio study (Artikel)
    Daniel Scheiber, Werner Eßl, Johann Strutzenberger, Frank Goodwin, Jürgen Spitaler, Georg Reiss
    Journal of Alloys and Compounds (2020)
    Externer Link:Link
  • Influence of WC-Co hard metal microstructure on defect density, initiation and propagation kinetics of fatigue cracks starting at intrinsic and artificial defects under a negative stress ratio (Artikel)
    T. Klünsner, T. Lube, C. Gettinger, L. Walch, R. Pippan
    Acta Materialia (2020)
    Externer Link:Link
  • Fatigue crack threshold analysis of TiAl SENT and CC specimens – Influence of starter notch and precracking (Artikel)
    S. Eck, J. Maierhofer, C. Tritremmel, H.-P. Gaenser, S. Marsoner, N. Martin, R. Pippan
    Intermetallics (2020)
    Externer Link:Link
  • A Posteriori Reconstruction of the Temperature Distribution in Surface Hardened Tempering Steel (Artikel)
    Daniel G. Mevec, Peter Raninger, Petri Prevedel, Vince Jászfi
    Scientific Reports (2020)
    Externer Link:Link
  • Thermal Management of Chip-on-Board LED Systems and Their Aging Response to Cyclic Power (Artikel)
    Mitterhuber Lisa, Magnien Julien, Kraker Elke
    Electronics Cooling (2020)
    Externer Link:Link
  • The influence of alloying on Zn liquid metal embrittlement in steels (Artikel)
    D.Scheiber, K.Prabitz, L.Romaner, W.Ecker
    Acta Materialia (2020)
    Externer Link:Link
11 12 13 14 15 16 17 18 19 20 21